Cold Heading Machine Tooling & Parts
Cut-Off Mechanism Mould for Cold Forming Machines
Machine-specific cut-off mechanism tooling for cold heading and cold forming lines. Jungu checks seat dimensions, wire range, cut-end quality, and wear marks before quoting.
What is Cut-Off Mechanism Mould for Cold Forming Machines used for?
A cut-off mechanism mould is a replacement tooling part that controls how wire is cut into blanks before cold heading or cold forming. The risk is machine fit. Two parts with the same name can have different blade seat width, clamp face, fixing-hole position, stroke timing, and support angle. If those details are guessed, the result can be burrs, angled blanks, unstable feed, or chipped cutting edges. Jungu reviews the machine model, installed tool slot, wire diameter range, required blank length, blade seat dimensions, and wear photos before quoting. For buyers, the useful question is not only whether the tool can be made, but whether it will fit the line without changing blank length stability or feed timing. We also check whether the current wear sits on the cutting edge, support face, or clamping area because each mark points to a different correction.
Common sourcing use
Wire cutting and blank preparation on cold heading or cold forming machines.
Related product families
Technical Review Scope
What Jungu checks
- Machine brand, model, station layout, installed slot, blade seat width, and fixing-hole position
- Wire material, wire diameter range, blank length, cut-end requirement, and target line speed
- Current failure: burrs, angled cuts, chipped edge, feed slip, abnormal noise, or worn support face
Why no standard price is shown
This is B2B custom tooling. A reliable quotation depends on drawing, material, size, tolerance, machine setup, annual quantity, and the mould-life issue the buyer wants to solve. Jungu quotes after technical review instead of showing a misleading fixed price.
Information Needed for Quotation
| Machine fit | Machine brand/model, station layout, installed slot size, blade seat width, and fixing-hole position. |
|---|---|
| Wire and blank data | Wire material, diameter range, required blank length, cut-end quality target, and line speed. |
| Current problem | Photos of burrs, angled blanks, chipped cutting edge, unstable feed, or worn contact faces. |
| Replacement target | Prototype quantity, spare set demand, destination country, and expected production window. |
Application and Buyer Fit
| Typical application | wire cutting and blank preparation on cold heading or cold forming machines |
|---|---|
| Buyer review focus | machine model, wire diameter range, cut length, blade seat width, clamping face, feed timing, burr condition, and visible wear marks |
| Quotation basis | drawing, material, tolerance, machine model, quantity, and target tool life |
| Review output | a replacement cut-off tooling route matched to the machine slot, blade seat, and blank-length stability target |
Inquiry Process
- Send machine model, tooling drawing, or clear photos of the installed cut-off assembly.
- Jungu checks seat dimensions, wire range, cutting edge support, and likely wear cause.
- Engineering confirms material, heat treatment, coating, and inspection points.
- Quotation is prepared only after the replacement route matches the machine interface.
FAQ
Can Jungu quote without a drawing?
Sometimes, but clear photos, machine model, critical seat dimensions, wire data, and a worn sample are still needed for a serious review.
Why do similar cut-off mechanism moulds fail after replacement?
The function may be similar while the machine interface is different. Blade seat width, support face, and feed timing can change the result.
Can this product be customized?
Yes. Jungu manufactures fastener mould tooling according to buyer drawings, samples, and machine requirements.
What should be sent first?
Send the drawing, material, machine model, tolerance requirements, annual quantity, and current tool-life problem.
Need this tooling reviewed?
Send drawings, machine model, material, and current failure photos for review.